I understand that the KX3 does not have the K-3's built in CW and PTT
interfaces on the RS-232 port, but it is really trivial to take off the
DTR and RTS lines from the RS-232 cable and through a couple of
one-transistor, one-resistor interfaces to the appropriate ports
73, Pete N4ZR
Check out the Reverse Beacon Network at
http://reversebeacon.net,
blog at reversebeacon.blogspot.com.
For spots, please go to your favorite
ARC V6 or VE7CC DX cluster node.
On 5/22/2014 11:50 AM, Hans J Rasmusen OZ7BQ wrote:
Thanks for the response. The solution is simple. N1MM appears no to support the
KX3 (K2 and K3) Command Set in full.
If you want to avoid the double slashes // in callsigns, you have to use the
standard N1MM key commands and a Keying interface like WinKeyer USB. More to
carry if you go portable, but may be easier if you participate in a CW contest.
73 and enjoy the forthcoming WPX CW contest.
OZ7BQ Hans Jørgen (Joe).
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
