Mike,
Are you using *anything* in addition to the basic cables between the
K-line units?
If so, try removing all the extras (includes the Keyline interrupter and
the RCA keying cables if used), and then see if it works as expected.
If it does, then begin putting the other things back in place to
determine which part is causing the failure.
73,
Don W3FPR
On 6/14/2014 4:27 PM, Mike Hagele AC6JA via Elecraft wrote:
I am using the most current firmware versions in the K3, KAT500, and
KPA500.
I am also using the Elecraft auxilliary cables.
Not sure what else to check as to why the KAT500 won't update the tuner
preselects when QSY'ing?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
