Well, someone who actually knows about this needs to weigh in. I recall
a list thread about this and changes being made in the latest firmware
to accommodate those who wanted the KAT500 to follow the current
frequency of the K3, without making any RF. Apparently there was a
downside ... KAT500 clicked some while tuning, which I guess annoyed
some. I'm beyond half-deaf and I run my radios with headphones all the
time so I don't hear anything from the KAT500 [or fans in the KPA500].
"Elecraft Standard Practice" in these situations seems to be, "Add a
K3/KAT500 menu option to turn whatever on/off." Possibly that might be
the answer here
Not going to put money on it, but my guess is ... that's what they've done."
73,
Fred K6DGW
- Northern California Contest Club
- CU in the 2014 Cal QSO Party 4-5 Oct 2014
- www.cqp.org
On 6/14/2014 4:44 PM, [email protected] wrote:
I have to transmit for a brief second after I switch bands for the tuner
to switch to the new setting. I'll usually just hear a click and it's done.
But I thought I read somewhere that the tuner would update to the new
settings when switching bands/frequencies automatically without having
to transmit a carrier.
I have the Elecraft auxilliary cables and the K3 and KPA500 bands track
properly.
Mike AC6JA
In a message dated 6/14/2014 4:29:46 P.M. Pacific Daylight Time,
[email protected] writes:
On 6/14/2014 12:11 PM, Mike Hagele AC6JA via Elecraft wrote:
> I am using a K3 and KPA500 with the KAT500. I also have the KAT500
> mode set to MAN. I thought that the firmware was supposed to switch
> the tuner automatically when you switch bands? After I go to a new
> band, I need to tap my key momentarily to get the tuner to tune to
> the new frequency. Is this normal? Let me know as I thought the
> tuner would remember the presets when QSY'ing to a new frequency?
> Any help would be appreciated. Thanks.
Hmmm ... I have the control cables ... K3-->KAT500/KAT500-->KPA500,
I've trained my KAT500 for all 3 antennas on all the bands that each of
them work on, and I run the KAT500 in MAN. All indications are that
the
KAT500 recalls the correct solution for the frequency when I QSY to a
new frequency or band.
I'm hardly an expert on the insides of Elecraft firmware, and I suppose
it could be recalling on very first sign of RF and doing so very
quickly
so that I don't notice it, but I really don't think so.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
