Rich; Since you are talking about the K3, I believe your conclusion to be correct, but I would not (yet) rule it out. I don’t believe that the K3 outputs the RxAnt status on the Auxbus. Interestingly, the K2 _does_ output the Rxant status, and the KRC2 can respond to that inout, although it may require a bit of extra work on my part.
I will do some additional research on the code (it has been quite a while…) and let you know if what you want is doable with the K3. Jack B, W6FB Elecraft Engineering On Jul 6, 2014, at 8:46 PM, Rich <[email protected]> wrote: > I have pretty much done an thorough search on this topic and have concluded > it cannot be done, but I thought I would throw it out here anyway. > > I believe that the outputs on the KRC2 on strictly controlled by band > information which it receives. I was wondering if there was a way to send RX > antenna status to the KRC2 which would close an output to send 12VDC to my > active RX antenna and another to activate 12VDC to the preamp for the RX ant > when I chose. > > My thought was along the lines of the DVK messages which can be activated via > the keyboard when using Writelog or other contest programs. I was hoping to > send a command via the keyboard to activate the RX ant on the K3 and at the > same time send the required 12vdc to the RX antenna via an output on the KRC2 > and the same for the preamp if I want it on/off. > > I hope this is clearer than mud. > > Rich > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
