Just to clarify... use of ALC with the PW-1 is not to adjust drive power. That's a bad practice. You MUST use the ALC line because the amp uses this as a primary means of protection. Without ALC, a fault condition can damage the amp.

73,
Josh W6XU

Well, yes it is when connected to an Icom transceiver it is used precisely to control drive power.

I have the PW-1 connected as recommended in it's manual to an IC-7600. My output control is set for about a hundred watts barefoot and 1 kW when the amp in enabled. The output power when driving the PW-1 is far less than 100 watts and the only thing controlling the drive is the ALC line.

Besides, I thought that's exactly what I said.....

The proverbial fly in the ointment is that the I don't believe the KX3 HAS and ALC input.

Chas


----- Original Message ----- From: "Josh Fiden" <j...@voodoolab.com>
To: <elecraft@mailman.qth.net>
Sent: Tuesday, July 29, 2014 9:54 PM
Subject: Re: [Elecraft] KXPA-100 to ICOM PW-1 amplifier


Just to clarify... use of ALC with the PW-1 is not to adjust drive power. That's a bad practice. You MUST use the ALC line because the amp uses this as a primary means of protection. Without ALC, a fault condition can damage the amp.

73,
Josh W6XU

On 7/29/2014 12:41 PM, Charlie T, K3ICH wrote:
You better make sure you have a reliable ALC connection in there somewhere because you'll smoke the PW-1 if you hit it with a hundred watts. They normally take about 35 -45 watts drive for full output.

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to pin...@erols.com

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Reply via email to