Peter,
I suggest that you probably don't want to go that route. What I
would suggest is that you use some digital mode software behind the K3,
something like FLDIGI, or your favorite application. You will see the
stream of data on its waterfall and you would use that for final tuning.
It also gives you the opportunity to use macros fairly easily. I do this
with my KX3 with PSK31 from time to time and discovered this way through
trial and error. It layers one additional on, but it appears to be a
more convenient way to operate.
If you are using HRD, you can use DM780 and have integral logging.
However, with NaP3 there is a way to calibrate your operation. Go
into configuration/rig and play with the IF offsets by mode. You should
be able to fix your problem, but I really recommend my original
suggestion. Best of Luck.
73,
Barry
K3NDM
On 10/2/2014 2:58 PM, Pete Smith N4ZR wrote:
I would like to be able to use my K3 with NaP3 through an LP-PAN, but
when I click on a signal, instead of going where clicked it sends the
VFO to a frequency approximately 2 KHz lower. I presume it may be
going to the suppressed carrier frequency instead of the Mark
frequency. Both NaP3 and the K3 are in AFSK A mode.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
