Pete,
I guess I don't understand. I use NaP3 and PSK31 without a problem.
I may not understand how you are configured. I use either DM780 or
FLDIGI and spot my signals on that and click in that window for a
signal. I do not use NaP3 or the KX3 for demodulation or decoding of any
of my digital signals. I think most of us are doing this. I, therefore,
do not have a problem.
Another issue I sense in this thread is possibly going to cause
some real problems. The tuning issue is not simple. The offsets will be
different for differing digital signals. One signal may want a 1200 Hz
offset while another may want 1800 Hz, etc. A single Data A offset
wouldn't work; it would need to b signal specific. I don't consider this
a bug in either NaP3 or the KX3. It's just the nature of the various
signals we play with. Here is a site the shows a configuration that
will work:
https://sdrzone.com/index.php?option=com_content&view=article&id=92:kx3-sdr-review&catid=20:mosaics&Itemid=572
73,
Barry
K3NDM
On 10/3/2014 8:49 AM, Pete Smith N4ZR wrote:
I just confirmed that offsets in the latest NaP3 setup menu have no
effect when in AFSK A. As someone reported, either here or elsewhere,
this is apparently a bug in NaP3, and since NaP3 is no longer
supported I'll have to find another solution. Too bad - it was *so*
close to perfect.
73, Pete N4ZR
Check out the Reverse Beacon Network at
http://reversebeacon.net,
blog at reversebeacon.blogspot.com.
For spots, please go to your favorite
ARC V6 or VE7CC DX cluster node.
On 10/2/2014 2:58 PM, Pete Smith N4ZR wrote:
I would like to be able to use my K3 with NaP3 through an LP-PAN, but
when I click on a signal, instead of going where clicked it sends the
VFO to a frequency approximately 2 KHz lower. I presume it may be
going to the suppressed carrier frequency instead of the Mark
frequency. Both NaP3 and the K3 are in AFSK A mode.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
