> I tune up with 20 watts, all is fine, 1.0 swr. But then I transmit with > power at around 5 watts, in a digital transmission, the KAT500 starts a > tuning cycle, then ends in a fault condition. If I transmit with the power > above about 10 watts, clear up to 100, everything works perfect?
As previously recommended, you should not leave it in auto after tuning. After tuning, use manual mode so that it doesn't "go hunting". This seems to be especially true for CW/SSB, where power varies between zero and X watts. Gary ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com