Well, I use iambic keying (mode B, because I learned to use a paddle on an ICOM 
radio, which would only do mode B. Anyway, this was before I even knew there 
was such a thing as mode A and mode B).

The following article questions the value of iambic keying, makes for an 
interesting read:
http://www.morsex.com/pubs/iambicmyth.pdf

For the speeds I typically plod along at, around the 20wpm mark, the iambic 
keying works quite well, and feels nice.

73,
Matt VK2RQ

> On 2 Dec 2014, at 11:37 am, Ken <[email protected]> wrote:
> 
> Yes, I’ve looked up and understand the theory of Iambic keying but 1) it’s 
> been weird to try and 2) I haven’t noticed any advantage for me.  Now maybe 
> there is an advantage at higher speeds?   But when I’ve run above 30 wpm, I 
> use a keyboard ;-)
> 
> 73, 
> Ken WA8JXM
> 
> 
>> On Dec 1, 2014, at 4:41 PM, G4GNX <[email protected]> wrote:
>> 
>> In short, yes you're doing it wrong. :-)
>> 
>> That said, if it works for you, who cares?
>> 
>> The correct way to use a twin paddle iambic keyer is to press on paddle 
>> first, fo9llowed by a squeeze action to hold both paddles on, but depending 
>> on what character you're trying to send.
>> 
>> For example. CQ (for a right handed keyer) would use the following sequence: 
>> Press right paddle and immediately squeeze both paddles without letting go 
>> the right paddle. Hold that squeeze until the first -.-. is sent, then let 
>> go for the inter-character space. To send the 'Q' press the right paddle and 
>> wait until the start of the second dash, then squeeze both paddles and 
>> immediately let go of the left hand paddle whilst continuing to briefly hold 
>> the right hand paddle until you're sure the entire --.- sequence has been 
>> sent, then let go the right paddle.ready to send whatever you want to come 
>> next.
>> 
>> I know this sounds long winded, but once you get used to it, it's very 
>> intuitive and very fast and accurate, as long as you practice it. Once you 
>> get proficient in that mode, you don't even think about it any more.
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[email protected]
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]

Reply via email to