Just a thought… Not using a KXPA but do use my radio remotely.. I run my remote control radio with HRD for the past 5 years.. I run the radio at 4800 with the thought that any issues might not affect the communications path to the radio from the computer. Never… had a drop-out.
Frank KG9H On Jan 16, 2015, at 1:12 PM, Edouard Lafargue <[email protected]> wrote: > Are you using a rig controller? In my experience, depending on how > 'chatty' your rig controller is, > it can interfere with the KX3/KXPA100 init routine. It is certainly the > case with mine (wizkers.io), since it > not only talks to the KX3 but also the KXPA100, every second. > > Ed, W6ELA > > On Fri, Jan 16, 2015 at 10:59 AM, Irwin Darack <[email protected]> wrote: > >> I recently checked and upgraded all of the Firmware with my KX3 (MCU = >> 2.27, & DSP = 1.3), KXPA (1.32) and PX3 (1.16) that was older. >> >> I found that it lost communications from the KX3 to the KXPA100. Hence it >> results in turning PA Mode Off. Even when I go back into the Menu settings, >> turn PA Mode on again, It results in turning PA Mode back off again. >> >> Even though I had full communications between the KX3 and KXPA100, to >> resolve the problem, I had to going into the utility program for the PX3, >> making sure it was communication with my computer, which it was, then >> update the KX3 Menu PA Mode to on. >> >> I am not sure where the glitch is occurring. I have the standard cable set >> up as in the PX3 Manual and all data rates are set to 38400 baud. It seems >> to be related to the PX3. >> >> Is there a way to extend the time out for the KXPA100? >> >> Thanks, Irwin >> >> -- >> Irwin KD3TB >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[email protected] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to [email protected] >> > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
