A couple of days ago I reported a fall-off in output from my K3 on some
bands. I wrote about this to Howard, K6IA, at Elecraft service, who
wrote back and suggested that one or more of the three screws that
attach the LPA board to the lower cover of the radio might have loosened.
Sure enough - one of the three was 1/2 turn short of tight. Tightened it
up, tested, all normal again. Ran auto TX calibration, all successful.
I happy camper am. Thanks Howard!
--
73, Pete N4ZR
Check out the Reverse Beacon Network at
http://reversebeacon.net,
blog at reversebeacon.blogspot.com.
For spots, please go to your favorite
ARC V6 or VE7CC DX cluster node.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
