That's an old fix for many radios
Open them up and tighten down all the screws
From: brian <[email protected]>
To: [email protected]
Sent: Friday, February 6, 2015 4:27 PM
Subject: Re: [Elecraft] More Legendary Elecraft Service or "The Turning of the
Screw"
Makes you wonder how they know such seeming impossible-to-know things.
Are there also magic potions and incantations available?
73 de Brian/K3KO
On 2/6/2015 20:55 PM, Pete Smith N4ZR wrote:
> A couple of days ago I reported a fall-off in output from my K3 on
> some bands. I wrote about this to Howard, K6IA, at Elecraft service,
> who wrote back and suggested that one or more of the three screws that
> attach the LPA board to the lower cover of the radio might have loosened.
>
> Sure enough - one of the three was 1/2 turn short of tight. Tightened
> it up, tested, all normal again. Ran auto TX calibration, all
> successful. I happy camper am. Thanks Howard!
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
