Not a good idea for the screws sticking out of capacitors and transformers. 
Willis 'Cookie' Cooke,TDXS Contest Chairman K5EWJ & Trustee N5BPS
      From: Harry Yingst via Elecraft <[email protected]>
 To: brian <[email protected]>; "[email protected]" 
<[email protected]> 
 Sent: Friday, February 6, 2015 5:36 PM
 Subject: Re: [Elecraft] More Legendary Elecraft Service or "The Turning of the 
Screw"
   
That's an old fix for many radios
Open them up and tighten down all the screws


      From: brian <[email protected]>
 To: [email protected] 
 Sent: Friday, February 6, 2015 4:27 PM
 Subject: Re: [Elecraft] More Legendary Elecraft Service or "The Turning of the 
Screw"
  
Makes you wonder how they know such seeming impossible-to-know things.

Are there also magic potions and incantations available?

73 de Brian/K3KO


On 2/6/2015 20:55 PM, Pete Smith N4ZR wrote:
> A couple of days ago I reported a fall-off in output from my K3 on 
> some bands. I wrote about this to Howard, K6IA, at Elecraft service, 
> who wrote back and suggested that one or more of the three screws that 
> attach the LPA board to the lower cover of the radio might have loosened.
>
> Sure enough - one of the three was 1/2 turn short of tight. Tightened 
> it up, tested, all normal again.  Ran auto TX calibration, all 
> successful. I happy camper am.  Thanks Howard!
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]


  
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]

  
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]

Reply via email to