Hi Arie, I am not sure I understand what LINK does to help when both receivers are on the same freq. What does F9-F12 below do to help? Tnx N2TK, Tony
-----Original Message----- From: Elecraft [mailto:[email protected]] On Behalf Of Arie Kleingeld PA3A Sent: Sunday, February 15, 2015 9:48 AM To: [email protected]; Wayne Burdick Subject: [Elecraft] K3 Beta 5r10 and LINK Wayne, Please do not take out LINK. I'm using it a lot in contests and in DXpedition work Just to give you and others the idea: With both main and sub RX's on the same freq, mode and BW I link them with LINK. But here comes the fun part. When working with the N1MM logger I use F9-F12 to quickly command the audio from the K3 main and sub: - F9 = listen A-B - F10 = listen A-A - F11 = listen B-B - F12 contains the commands to copy VFO freq and mode from A to B and LINK the VFO's. This unique flexibility of the K3 is impossible in the DIVERSITY mode. so P L E A S E , keep LINK in there. 73 Arie PA3A Wayne Burdick schreef op 15-2-2015 om 5:04: > Mike (et al), > > It's beta, experimental, subject to further revision. We took the original dual-PB out based on earlier feedback suggesting no one was using it (same with LINK). APF, in contrast, has been hugely popular. But with this input, we'll reconsider. > > Thanks, > Wayne > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
