Johnny, We have not abandoned the LINK function. It is available in the menu, and can be assigned to a programmable function switch. There's also an LN remote-control command that remains unchanged. It can be used from a computer or embedded in K3 front panel switch macros.
But we decided to remove it from the SUB switch, because so many operators have accidentally gotten into LINK when the intent was to simply turn on the sub receiver or put it into diversity mode. This has resulted in many phone calls to customer support. Many K3 users have commented that they appreciate the removal of LINK from the SUB switch. 73, Wayne N6KR On Feb 15, 2015, at 4:51 PM, Johnny Siu <[email protected]> wrote: > Hello Arie, > I agree with you 'LINK' should not be abandoned. Please excuse my language, > I would consider the idea of abandoning the 'LINK' is stupid. > During APDXC 2012 in Icom HQ Osaka, I spoke to Mr. Inoue JA3FA that I did not > understand why IC7800 did not have the function of LINK for both VFOA & B so > that I could use the dual receivers for diversity reception. I also > mentioned that their competitor K3 had that function which I often used. > Skillful use of diversity reception will enable you to pick up the odds even > with simple antennae. > 73 > Johnny VR2XMC > 寄件人︰ Arie Kleingeld PA3A <[email protected]> > 收件人︰ [email protected] > 傳送日期︰ 2015年02月16日 (週一) 1:10 AM > 主題︰ Re: [Elecraft] K3 Beta 5r10 and LINK > > Tony > > LINK ties both VFO's to the mail freq dial en keeps them insync when you > turn the dial knob. > So both receivers keep working on the same freq. > > What I often use i diversity listening so with two receivers and two > antennas on the samen freq. > Diversity puts the main RX audio on the left ear of the headset, and the > Sub on the right ear. That's the normal situation. > In my case, the F9-F12 buttons in N1MM contain commands to the K3 that > switch the audio to my liking (that can also be done in the Config, but > that takes too much time during QSO) This way I can switch listening > from diversity (listen both MainRX and SubRX at same time) to only main > RX (main RX audio on both ears) or only sub RX (Sub RX audio on both > ears) depending on where the signal is best. > The commands to do this are in the programmers manual of the K3. It's > really fun to control some beautiful K3 features from the keyboard like > this. > > 73 > Arie PA3A > > > > > > > N2TK, Tony schreef op 15-2-2015 om 16:38: >> Hi Arie, >> I am not sure I understand what LINK does to help when both receivers are on >> the same freq. What does F9-F12 below do to help? >> Tnx >> N2TK, Tony > ..... >> - F9 = listen A-B >> - F10 = listen A-A >> - F11 = listen B-B >> - F12 contains the commands to copy VFO freq and mode from A to B and LINK >> the VFO's. >> >> > > ______________________________________________________________ > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
