Chris, Are you confident the PP''s are correctly assembled? When you inserted them into the body did they "snap" or "click" into place? If so, it should be impossible to pull the wire/brass connector out of the plastic body.
73 Ken - K0PP On Feb 17, 2015 7:58 AM, "Chris Hallinan" <[email protected]> wrote: > Hi list, > > I've noticed that almost every time I move my K3, it powers down. I > have little doubt it's the power pole connectors. I soldered them, > and I'm pretty good with a soldering iron. It seems to be plugged in > and fully seated. But why is it so fragile? I used the powerpole > connectors and contacts that came with my K3 kit. > > Has anyone else notice this phenomenon? Any advice? > > Thanks and 73, > > Chris > K1AY > > -- > Life is like Linux - it never stands still. > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
