If you're a serious CW op you'll want a narrow-bandwidth crystal filter.
The stock SSB filter is fine for casual CW operation.
If your computer doesn't have an RS-232 port, you'll need a KUSB
USB-to-RS232 adapter so you can do firmware updates.
Other than that, a bare-bones K3 is quite sufficient.
Alan N1AL
On 03/07/2015 08:42 AM, Richard Gillingham wrote:
I’m thinking about purchasing the K3-100 kit. I plan start with the
minimum configuration and adding features as I get the $$.. I
already have the KX3, PX3 and am using the KPA500 and KAT500 with my
Icom 756 Pro II.
I’ll assume I won’t need the internal atu with the K3, and will add
the P3 and IF out board when the time comes. I’ll get the interface
cable to the KAT500… With this bare bones K3, is there anything else
that you all might feel is indispensable?
73 to all and good DX
Gil, W1RG
Sent from Windows Mail
______________________________________________________________
Elecraft mailing list Home:
http://mailman.qth.net/mailman/listinfo/elecraft Help:
http://mailman.qth.net/mmfaq.htm Post:
mailto:[email protected]
This list hosted by: http://www.qsl.net Please help support this
email list: http://www.qsl.net/donate.html Message delivered to
[email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
