On 2015-03-07 11:42 AM, Richard Gillingham wrote:
I’ll get the interface cable to the KAT500… With this bare bones K3,
> is there anything else that you all might feel is indispensable?
If you operate any CW or RTTY you will want the 400 Hz filter. IMO, that's the best all around filter - particularly if you have any idea of adding the KRX3 in the future since you will not need to try to match five-pole filter center frequencies after the fact. 73, ... Joe, W4TV On 2015-03-07 11:42 AM, Richard Gillingham wrote:
I’m thinking about purchasing the K3-100 kit. I plan start with the minimum configuration and adding features as I get the $$.. I already have the KX3, PX3 and am using the KPA500 and KAT500 with my Icom 756 Pro II. I’ll assume I won’t need the internal atu with the K3, and will add the P3 and IF out board when the time comes. I’ll get the interface cable to the KAT500… With this bare bones K3, is there anything else that you all might feel is indispensable? 73 to all and good DX Gil, W1RG Sent from Windows Mail ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
