Hi. I've also had this problem a couple of times. If you have the KX3 connected to a computer - disconnect. I think that solved the problem for me. You can connect to the computer again when the KXPA100 is up and running. 73 de Haø/la4xx
On 15-03-12 22:59, "David F. Reed" <[email protected]> wrote: > > Folks, > > up til today my combination in the subject line has worked flawlessly. Today > a couple of problems surfaced. > > (1) the power switch on the PX3 is intermittent for ON, always works OFF. In > other words, it does not always power ON when asked to, but always powers OFF > when requested to. Not a big deal, but would be nice to fix... > > (2) the KXPA100 would not come on; in trying to track it down, I observe that > the PA mode in the KX3 was OFF; setting it to ON, the KXPA100 turns on, and > the Sys Fault LED flashes, then it turns off the KX3 PA mode and itself OFF. > Big deal, and would love to fix it. > > I have rechecked all the cabling and removed and reinserted it i to no avail. > > Thoughts or suggestions? > > Thanks & 73 de Dave, W5SV > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] <[email protected]> > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
