Sadly, changing nothing, both problems are back today.
On 3/13/15 9:19 AM, David F. Reed wrote:
Thanks all for the suggestions; in the end, none worked. However, I
then reloaded all the microcode in all 3 units, and voila, they all
play nice together again...
73 de Dave, W5SV
On 3/12/15 4:59 PM, David F. Reed wrote:
Folks,
up til today my combination in the subject line has worked
flawlessly. Today a couple of problems surfaced.
(1) the power switch on the PX3 is intermittent for ON, always works
OFF. In other words, it does not always power ON when asked to, but
always powers OFF when requested to. Not a big deal, but would be
nice to fix...
(2) the KXPA100 would not come on; in trying to track it down, I
observe that the PA mode in the KX3 was OFF; setting it to ON, the
KXPA100 turns on, and the Sys Fault LED flashes, then it turns off
the KX3 PA mode and itself OFF. Big deal, and would love to fix it.
I have rechecked all the cabling and removed and reinserted it i to
no avail.
Thoughts or suggestions?
Thanks & 73 de Dave, W5SV
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
