Good to hear you got it, Dave!
Phil W7OX
On 3/13/15 7:19 AM, David F. Reed wrote:
Thanks all for the suggestions; in the end, none
worked. However, I then reloaded all the
microcode in all 3 units, and voila, they all
play nice together again...
73 de Dave, W5SV
On 3/12/15 4:59 PM, David F. Reed wrote:
Folks,
up til today my combination in the subject line
has worked flawlessly. Today a couple of
problems surfaced.
(1) the power switch on the PX3 is intermittent
for ON, always works OFF. In other words, it
does not always power ON when asked to, but
always powers OFF when requested to. Not a big
deal, but would be nice to fix...
(2) the KXPA100 would not come on; in trying to
track it down, I observe that the PA mode in
the KX3 was OFF; setting it to ON, the KXPA100
turns on, and the Sys Fault LED flashes, then
it turns off the KX3 PA mode and itself OFF.
Big deal, and would love to fix it.
I have rechecked all the cabling and removed
and reinserted it i to no avail.
Thoughts or suggestions?
Thanks & 73 de Dave, W5SV
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
