Thanks to all who replied. I now know that the new "feature" is time
domain only which doesn't help me. I tried unplugging the RS-232 cable,
and apparently the phase of the moon is not quite right because I really
don't see much. I tried running up the gain [SCALE] to no avail,
brought the noise up too.
I think I'll have a QSO with a local with a P3 and he can do a screen
capture and send it to me.
Thanks again,
73,
Fred K6DGW
- Northern California Contest Club
- CU in the 50th Running of the Cal QSO Party 3-4 Oct 2015
- www.cqp.org
On 6/7/2015 2:04 PM, GRANT YOUNGMAN wrote:
The new P3TXMON does not include transmit spectrum monitoring.
Although I’ve never tried it, if you unplug the P3 from the K3, you
can/might observe your transmit spectrum. But this isn’t a feature.
Alan sent an email about this some time ago .. don’t have it, but you
can probably find it in the archive. The K3 does not normally
provide a transmit spectrum output. There’s only transmit IF
“leakage”, which varies by K3, the time of day, phase of the moon,
lottery numbers … so it wouldn’t be consistent enough to have a
documented “feature”.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
