All - just wanted to send an update to this group - already did it on the WSJT-X Yahoo group.
I’ve exhausted all efforts on my end trying to get this “fixed”. Nothing I’m able to do seems to make digital communication between my iMac, Tascam US-125M, and my K3 work at 48000 Hz. It works great at 44100 Hz, so that’s where I will keep things. It turns out that in addition to WSJT-X not working at that setting, neither does FLDIGI. They both function properly at 44100. So…. if it ain’t broke, I’m not gonna try “fixing” it any longer. Stupid computers….. :-) Thanks for everyone’s suggestions. 73, Jim / W6JHB > On Monday, Jul 6, 2015, at Monday, 3:43 PM, Robert Nobis <[email protected]> > wrote: > > Hi James, > > I use a TASCAM US-366 with my Mac and have the sample are set to 48,000 Hz > with no issues running WSJT-X versions 1.4 and 1.5. I use VOX control. You > might have to go in and week the K3 VOX Gain and Line In Gain menu settings, > however. > > 73, > > > Bob Nobis - N7RJN > [email protected] <mailto:[email protected]> > > >> On Jul 6, 2015, at 13:18, James Bennett <[email protected] <mailto:[email protected]>> >> wrote: >> >> Nobody??? Am I the only K3 owner using a Tascam sound card and a Mac to run >> WSJT-X?? >> >> Jim Bennett / W6JHB >> Folsom, CA >> >>> On Jul 4, 2015, at 12:30 PM, James Bennett <[email protected]> wrote: >>> >>> I posted this on the WSJT-X Yahoo group and still no resolution. Hoping >>> that perhaps someone on this reflector might have some thoughts on the >>> problem. It isn’t a real “problem” per se, as I can certainly use my system >>> as it is, but just wondering about this “quirk”. Here is my post: >>> >>> "I just recently upgraded from WSJT-X 1.4.0 to 1.5.0 and have a question >>> about something in the User Guide. I'm running on an iMac, OS X 10.10.4, an >>> Elecraft K3, and my sound card is a Tascam US-125M. I am able to use the K3 >>> and the new version of the software but have an issue with the >>> documentation procedure…. >>> >>> The WSJT-X user manual says to use the Apple Audio MIDI Setup utility to >>> configure the sound card to 48000 Hz, two channel, 16 bit. I have been >>> using the above configuration at 41000Hz with no problems. When I try >>> running at 48000 Hz, the radio does not go into transmit mode. If I switch >>> it back to 44100 Hz, it works OK. The specs for the US-125M indicate that >>> it should work up to 48000 Hz. When set to 48000 Hz, I’m able to get the >>> usual decodes, but can’t transmit. I’ve got it set for the K3/KX3, and CAT >>> control. >>> >>> Any idea why I'm limited to 44100 with this configuration and why 48000 >>> fails to work?" >>> >>> Jim / W6JHB >>> ______________________________________________________________ >>> Elecraft mailing list >>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >>> Help: http://mailman.qth.net/mmfaq.htm >>> Post: mailto:[email protected] >>> >>> This list hosted by: http://www.qsl.net >>> Please help support this email list: http://www.qsl.net/donate.html >>> Message delivered to [email protected] >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[email protected] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to [email protected] <mailto:[email protected]> ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
