On 2015-07-30 5:11 AM, Andy McMullin wrote:
> I respectfully suggest that you watch his video and listen to the
> explanation before making comments.
I did watch his video.
> He does not ask you to "set the microphone level to 100%" — he says
> to adjust the erroneous interface control to the 100% position.
He says that any setting of the mic slider other than 100% is
attenuation. That is completely incorrect as can be demonstrated
simply by setting the legend to decibels instead of percent.
The only valid "bug" in his report is that Windows 7 and prior
resets the endpoint gain to maximum when the endpoint is opened.
Even that "bug" has been fixed in the Windows 8 driver.
73,
... Joe, W4TV
On 2015-07-30 5:11 AM, Andy McMullin wrote:
I respectfully suggest that you watch his video and listen to the explanation
before making comments. In particular, when software is not executing correctly
you should remember that it is not doing what it is supposed to do.
He does not ask you to "set the microphone level to 100%" — he says to adjust
the erroneous interface control to the 100% position. Not the same thing.
Watch the video (and pay attention to the oscilloscope displays), then try it
for yourself to see what happens.
I hope this helps
—
Regards
Andy, G8TQH
On 30 Jul 2015, at 09:36, Peter Eijlander (PA0PJE) <[email protected]> wrote:
Op 2015-07-30 06:09 schreef Joe Subich, W4TV:
The individual posting this does not know what he's talking
about. His instruction to set the "microphone" level to 100%
is completely *wrong*.
Joe,
I have the impression he *DOES* know what he's talking about...
This is a bug he's reporting in the Windows operating system in conjunction
with a certain brand of devices.
73,
Peter
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
