I use either an Edgeport 8-port USB to serial adapter, or a Gearmo 4-port USB to serial adapter, or a KUSB or KXUSB depending on what I'm testing. No USB hubs here, tho.
73 de Dick, K6KR > On Aug 24, 2015, at 18:57, David Ahrendts <[email protected]> wrote: > > In a multiple Elecraft device station, I’m curious if anyone connects all > KUSBs to a USB hub semi-permanently so that when you need a connection you > already have that hardware access? Realizing you cannot run two Utility > programs simultaneously (at least I haven’t had success with that), what is > your setup? I have attempted with a USB hub into a Mac Mini with marginal > success. Please opine. > > David A., KC0XT > > > > David Ahrendts [email protected] > > > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
