Hi to the group again I have a USB hub with a USB to rs232 for my K3 and another for my KX3. I have never tried to run both at the same time but they have both been on the same hub for 2 years and they always work, Port 4 for one, Port 7 for the other and Port 5 for the WinKeyer USB which I know works at the same time as the KX3.
Again hope I did not waste band width but thought my experiance would help. 73 Ken W0CZ w0cz at i29 dot net Sent from my iPad > On Aug 24, 2015, at 8:57 PM, David Ahrendts <[email protected]> wrote: > > In a multiple Elecraft device station, I’m curious if anyone connects all > KUSBs to a USB hub semi-permanently so that when you need a connection you > already have that hardware access? Realizing you cannot run two Utility > programs simultaneously (at least I haven’t had success with that), what is > your setup? I have attempted with a USB hub into a Mac Mini with marginal > success. Please opine. > > David A., KC0XT > > > > David Ahrendts [email protected] > > > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
