Bob, Thanks for you reply. Here are my mixed results. Some of these items are solved.
1) My lower limit was set to 0, so I bumped it up to 100hz. It removed a small sliver of waterfall on the left hand side, but kept the large black gap between 0 and ~600hz. Not sure if that is the way fldigi just displays waterfalls and that portion of the sideband... 2) Fixed! I think with your and Don's help, I got this one solved. Thanks for your input. 3) I changed my "transmit signal" under Waterfall -> Display to .05, which is the lowest it will go before 0. It was set at .10, so one tick to the left and my transmit waterfall waveform still gets pushed outside the red waterfall selector. I adjusted my output level in Windows for my Signalink down to 25% with still no change in waveform on the waterfall. Did the same test on my signalink TX 4) This one is solved. Your comment about PPT tone and serial port PPT got me looking at my rig control. I use hamlib as my rig control, and under that menu, PPT via Hamlib command was checked. I uncheck that box and now the radio returns to receive mode after transmitting! Resolved!!! ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
