Hello all. I've looked through the help topics and didn't see my issue asked or resolved, so I'll ask it here, as I'm a digital newbie...
Using up to date fldigi on a Windows Vista laptop. Signalink USB modem. KX3. Hamlib for rig control within fldigi. I hook everything up, put the radio in DATA A mode and follow the instructions on this webpage https://k4mtx.wordpress.com/2013/04/11/kx3-fldigi-setup/ My questions are 1) I don't see the whole 3khz waterfall. My filters are wide open, but there is around 750hz missing towards the bottom of my waterfall. Is that normal? My waterfall ends abruptly at 3khz, so I know it's working and I'm able to see other stations transmitting and it's decoding on fldigi. 2) When I transmit, I'm not able to adjust my ALC, which in the webpage above, I should be able to adjust that? It looks like that option is turned off in Data A mode? 3) Should my transmit signal be spilling out of my yellow bars when I transmit, or am I over driving my signal? 4) After I get done transmitting (audible tones), it hangs with the TX red light on and does not automatically go into receive mode. I have to hit my XMIT button to return to receive. Then I can see my waterfall. I've checked my macros and they all end with <RX>. I'm sure there is a setting I'm not seeing. Thanks for the responses! ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
