My Pc has the svga installed when I put the kit together but I do not have a monitor installed for svga yet. I originally was able to download the firmware using the usb a/b cable and my computer.
The usb a/b cable is now connected to the K3s usb port and using the lp-bridge for rig control/ logging. The P3 is seeing signals and waterfall but does not display the VFO A frequency in the center of P3 display, Instead it show 0 in center and + - 19.5 on each end of display. The P3 is port connected to the K3s with the RS232 cables included. I cannot connect to the utilites or Elecraft through the supplied cables. What am I missing here? Earl, K4KAY ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
