I have a K3. Did not have the problem in 5.33. Do not have the problem in 5.38. I am unable to duplicate your problem. In Data A, and b SEt width control varies width in sub RX while main RX stays the same.
Your report sounds like you are in diversity mode. My frequency shows as 1.814.9 The right decimal point is blinking. Is your right decimal point in the VFO A display blinking? I have not had bench time to install the KSYN3A mods. What is your status with the SYN mods? 73, Guy On Fri, Oct 23, 2015 at 3:39 PM, Elliott Lawrence <[email protected]> wrote: > Changing to MCU 5.38 did not solve the problem. Need to contact K3 > support! > 73 > Elliott WA6TLA > > On Oct 23, 2015, at 10:57 AM, Elliott Lawrence <[email protected]> wrote: > > > Using the latest K3 firmware MCU 5.35 for my K3 (not K3S). In the Data > mode only, setting the bandwidth of the main receiver also causes the > subreceiver bandwidth to track and be identical. The BSET control XFIL for > Data has no effect. In CW and SSB modes the main receiver XFIL can be > adjusted and the subreceiver XFIL changed independently using BSET. This > was definitely not the case for previous firmware versions. This > operation is not band dependent. > > > > I have checked all of the firmware notes and the latest K3S manual and > can’t find anything to explain this operation. Am I missing something? Is > this a new and unwanted improvement? > > > > Thanks for your comments. > > 73 > > Elliott WA6TLA > > > > > > ______________________________________________________________ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:[email protected] > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > Message delivered to [email protected] > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
