Hello all, I'm seeing an issue on the SVGA side of the P3.
In order to utilize the screen space more effectively I often use the CENTER control to shift my TX frequency to the left side up the display (when the DX is listening up) to show those calling on the right side of the display. [The alternative is to use the SPAN control, but much of the screen is under utilized.]
This works great until I QSY or adjust the RX frequency. At that point the SVGA display no longer synchs with the P3 display so this is limited to only the SVGA portion. The shaded areas shift to anywhere on the SVGA display (1024x768), sometimes even swapping sides of the display. I have to revert to watching the P3 only.
It stays with an incorrect display on the SVGA until I tap the fixed/track tune in the menu. Then it works properly, until the next time I slide the display to the side.
I've not seen this mentioned on the list. Can someone else confirm this behavior? It appears to be a bug.
I've reloaded the entire P3 firmware package, this situation remains. The P3 is functioning properly, this is solely an SVGA issue.
Thanks in advance, Rick wa6nhc ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
