More data points: I usually use FixMode set to 'static' and FixTrack
set to 'Fixed tune mode'. I don't know how that factors in... It may
be another cause, but by cycling FixTrack, I can get it to display
properly AFTER I recenter the display to start over again.
This happens consistently here. Thanks for checking your station.
Rick nhc
On 10/30/2015 9:03 AM, Rick Prather wrote:
Rick,
I haven’t been able to duplicate what you describe.
73,
Rick
K6LE
On Fri, Oct 30, 2015 at 8:26 AM, Rick WA6NHC
<[email protected] <mailto:[email protected]>> wrote:
Hello all,
I'm seeing an issue on the SVGA side of the P3.
In order to utilize the screen space more effectively I often use
the CENTER control to shift my TX frequency to the left side up
the display (when the DX is listening up) to show those calling on
the right side of the display. [The alternative is to use the
SPAN control, but much of the screen is under utilized.]
This works great until I QSY or adjust the RX frequency. At that
point the SVGA display no longer synchs with the P3 display so
this is limited to only the SVGA portion. The shaded areas shift
to anywhere on the SVGA display (1024x768), sometimes even
swapping sides of the display. I have to revert to watching the
P3 only.
It stays with an incorrect display on the SVGA until I tap the
fixed/track tune in the menu. Then it works properly, until the
next time I slide the display to the side.
I've not seen this mentioned on the list. Can someone else
confirm this behavior? It appears to be a bug.
I've reloaded the entire P3 firmware package, this situation
remains. The P3 is functioning properly, this is solely an SVGA
issue.
Thanks in advance,
Rick wa6nhc
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
<mailto:[email protected]>
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
<mailto:[email protected]>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
