Rick, I haven’t been able to duplicate what you describe.
73, Rick K6LE On Fri, Oct 30, 2015 at 8:26 AM, Rick WA6NHC <[email protected]> wrote: > Hello all, > > I'm seeing an issue on the SVGA side of the P3. > > In order to utilize the screen space more effectively I often use the > CENTER control to shift my TX frequency to the left side up the display > (when the DX is listening up) to show those calling on the right side of > the display. [The alternative is to use the SPAN control, but much of the > screen is under utilized.] > > This works great until I QSY or adjust the RX frequency. At that point > the SVGA display no longer synchs with the P3 display so this is limited to > only the SVGA portion. The shaded areas shift to anywhere on the SVGA > display (1024x768), sometimes even swapping sides of the display. I have > to revert to watching the P3 only. > > It stays with an incorrect display on the SVGA until I tap the fixed/track > tune in the menu. Then it works properly, until the next time I slide the > display to the side. > > I've not seen this mentioned on the list. Can someone else confirm this > behavior? It appears to be a bug. > > I've reloaded the entire P3 firmware package, this situation remains. The > P3 is functioning properly, this is solely an SVGA issue. > > Thanks in advance, > Rick wa6nhc > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
