I have just bought the P3-kit to work with my K3 S/N 23xx. According to the P3 manual, the Male – Female DE-9 cable should be connected between the XCVR connector and K3:s rear panel RS232 connector. My present setup for the K3 is with Microkeyer2 as I am working a lot of contests using N1MM+ for logging and Logger32 for DX-ing. The station computer is a HP Laptop, using one USB-port. The Microkeyer2 USB Device router is setup so that K3 CAT and PTT is COM3, Winkey CW is COM 5 and FSK is COM 6 and there is a Microkeyer2 cable connected to K3 RS232. The question is , can I move this cable to the P3 PC connector in the back of P3 and communicate via the P3 to the K3 ?? Do I need to setup unother COM-port for the communications P3 to K3?? It must be somebody out there who is also using Microkeyer2 together with K3 and P3!!
73 /SM6BGG/Kurt Email: [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
