Phil,
I will take the given opportunity to disagree. Our Field Day
operation uses all KX3s, QRP, That accounts for 3AB + a GOTA station.
There have been times when we found one of our GOTA ops on the same band
and in the same portion of the band. What we have found is that if the
other radio is not in the same part of the band, you may not even know
he is there. However, you know he's there. If he is far enough away,
you could work through him. There is one caveat. We do have our antennas
really spread out. Our GOTA antenna(s) can be any where from 200'-400'
away depending on which of our many antennas are being used at the time.
And secondly, all of our radios are using the 8 KHz offset. I was amazed
at the demonstration the first time it happened. I would say that the
KX3 can handle any intelligently crowed environment.
73,
Barry
K3NDM
------ Original Message ------
From: "Phil Wheeler" <[email protected]>
To: [email protected]
Sent: 12/11/2015 6:23:11 PM
Subject: Re: [Elecraft] Receivers?
Scott,
I agree with all that Ron says -- and have the K2, K3 and KX3 .. and
like them all.
Re "I am considering the KX3": The one caveat I would add, and others
can expand on (or disagree with) this, is that if you operate in a
dense ham environment like Field Day or with other nearby hams
operating on the same bands the direct-conversion KX3 will not be as
good as the two superhets because you may have more difficulty hearing
weaker signals with those strong, nearby signals at adjacent
frequencies.
In Auckland this may or may not be an issue for you -- but as I recall
70% or so of New Zealand's population is in the Auckland area.
73, Phil W7OX
On 12/11/15 1:40 PM, Ron D'Eau Claire wrote:
Scott, the three rigs use different design formats:
The K3 and K2 and conventional superhetrodyne formats with an
Intermediate
Frequency in the H.F. range and crystal filters to set the passband.
The K2
has an adjustable crystal filter and the K3 uses fixed crystal filter
bandwidths. The basic K2 bandwidth is established by the crystal
filter
while the K3 adds an adjustable DSP filter after the crystal filter.
(The K2
has an optional audio DSP for enhanced filtering.)
Although you will often see Elecraft rig owners refer to "roofing
filters"
the Elecraft rigs avoid them, using an I.F. in the H.F. range instead
that
avoids a lot of the compromises involved in up-converting to a first
I.F. in
the VHF range with a VHF "roofing filter" to set the initial
selectivity.
The KX3 is quite different. It is a high-performance direct conversion
receiver using phasing to suppress the unwanted sideband followed by
filtering of the resulting audio.
I'm a casual, mostly QRP operator who avoids pile-ups (and so
contests) and
enjoy all three. If I had to settle on one or the other I'd probably
take
the KX3 as my first choice because of its small size, the
"transparent"
sound of a direct conversion format and options such as the PX3
panadapter.
My second choice would be my trusty and ever dependable 15 year old K2
simply because I'm basically an "analog" sort of guy. But I have no
complaints about the K3/K3S. I'm sure others who enjoy busting
"pileups"
will have more to offer about the advantages of the K3/K3S.
For detailed test comparisons check out the results published by
Sherwood
Engineering on their web site:
http://www.sherweng.com/table.html
-----Original Message-----
From: Elecraft [mailto:[email protected]] On Behalf Of
Scott
Gillen ZL1CHM
Sent: Friday, December 11, 2015 1:09 PM
To: [email protected]
Subject: [Elecraft] Receivers?
Can anyone compare the receivers in the KX3 versus K3 versus K2? Is
there a
significant difference? I am considering the KX3.
73
Scott
N0HOK / ZL1CHM
Auckland New Zealand
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
