Bert,
I don't know if the K3 IF output is broad enough to support a 4 MHz span
(I suspect it is not).
He would have to find an SDR receiver capable of supporting that 4 MHz
span and connect it to the K3 IF output.
I do know that SDR dongles are capable of 2 MHz span, but I have never
seen one that does a 4 MHz span.
Perhaps your young friend will have to develop something on his own.
73,
Don W3FPR
On 2/7/2016 1:33 PM, Bert Rollen wrote:
All,
I have a young friend who wishes to do the following -
(my summary, not his words)
- Panadapter (or SDR) with 4Mhz or more display (not just a few
hundred kHz)
- Capable of 144 MHz - 148 MHz
- Point & click control a rig (K3, KX-3, Flex-6700, rig w/ 144 MHz
transverter etc.)
Essentially, he wants typical pan-adapter display and control, but 4000 kHz
wide (or more)
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
