Thanks for the answer, guys! That helped! ! On Tuesday, February 9, 2016, Don Wilhelm <[email protected]> wrote:
> Rob, > > Did you set the CONFIG: RS232 to USB? You should then be able to get > K3Utility to communicate with the K3 over USB. > Once you accomplish that, you should be able to download the new firmware > through the USB port. > > If that does not work, set the switch on the back of the board to the > RS-232 position and connect the PC (with a USB to serial adapter) to the > dongle provided with the upgrade kit - be sure to set the RS-232 menu > parameter back to 38400 to use RS-232. > > I recall that firmware 4.86 is before the memory slots for the TX Gain > data was moved, so be sure to run TX Gain Calibration after the firmware > upgrade. > > 73, > Don W3FPR > > On 2/8/2016 10:41 PM, ROBERT KIMPEL wrote: > >> I just completed the install of the KI03 update to my K3 SN 4843 and >> guess what? I forgot to update the firmware to the latest version (4.86 >> now). The PC won’t talk to the K3 through the USB! Do I need to restore the >> old boards and then update? I am watching for your HELP! >> Rob, KJ6ILO >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[email protected] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to [email protected] >> > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
