Rich, Thanks for your input. I had to go to the Mike input with the Codec and change to 2 channel. That took care of the issue.
73, N2TK, Tony -----Original Message----- From: Elecraft [mailto:[email protected]] On Behalf Of Richard Ferch Sent: Friday, February 12, 2016 4:54 PM To: [email protected] Subject: Re: [Elecraft] K3 KIO3B - FSK - stereo Here is something to check: Right-click the speaker icon in the Task Bar and select Recording devices. In the Sound window select the USB Audio Codec and click on Properties. In the Properties window click on the Advanced tab and check the Default Format. If it is set to 1 channel, ... change it to 2 channel, ... . Also, make sure that the USB Audio Codec is not selected as the Default Device or the Default Communications Device - these should both be set to the motherboard sound card in your PC. You should see main RX audio in the left channel. If the subRX is off, you might see a bit of leakage from the left channel in the right channel, but if the subRX is on you should only see subRX audio. When you are transmitting, if your Monitor level is non-zero you should see the transmitted signal in both channels. 73, Rich VE3KI N2TK wrote: > Trying to setup the CODEC on the KIO3B. Is it stereo that it will allow me > to do what I am presently doing for two channels? > > When I select Microphone (4-USB Audio CODEC) for both MMTTY's, I get the > same signal on both MMTTY's. The second receiver has no impact. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
