Hi The 7 on the tip means 700 degrees F This is the correct tip temperature for building your kit. I would recommend the PTA7 tip for most work. You may want to get a PTC7 for times when a large tip is needed. I do not recommend the long reach tips because the tip is just too far away from the heater and cools off when making joints before the regulator can react to the heat load.
Solder 63/37 Kester 44 or 285 .025 cutters Xcelite 170M or Hakko CHP170 NN pliers Xcelite 378M small magnifying glass #1 Phillips screwdriver with magnetic tip small jewelers screw driver or trimpot adjusting tool lead bending tool Mouser 5166-801 You can get all of it from Mouser. Quick service and no minimum order Don Brown KD5NDB ----- Original Message ----- From: "Darwin, Keith" <[EMAIL PROTECTED]> To: "Elecraft Discussion List" <elecraft@mailman.qth.net> Sent: Thursday, March 02, 2006 9:19 AM Subject: [Elecraft] Gearing up to build - where to get tools? Hey folks, I have some tools but will need more for the K2. I have a Weller WTCPT (or whatever it is) soldering station with two tips. Both have a "7" on the bottom (700 degree?). One is the original and one is a very thin pointy tip. I have a static mat, a clear bench and a workable light. I'm thinking I need the following and wonder if there is a preferred place to get them at a fair price? - Solder - Small side cutters - Small needle nose pliers - Other tips for the weller - Helping hands parts holder - Solder braid (for desoldering) I have access to a vacuum desolder station so if things get bad I can go that route. Where should I get these things? What else do I need? - Keith KD1E - Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com