Are you using the Power switch on the radio or by chance turning OFF the power-supply?
Sent from my iPhone ...nr4c. bill > On May 23, 2016, at 2:33 AM, danny.higgins <[email protected]> wrote: > > WSJT not running – K3S not connected to PC. I still need to reset PTT-KEY > after a power cycle – it always goes back to OFF-OFF. The same thing happens > in USB or DATA modes. > > Danny, G3XVR > > From: Don Wilhelm > Sent: 23 May 2016 06:26 > To: danny.higgins; Vic Rosenthal 4X6GP/K2VCO; [email protected] > Subject: Re: [Elecraft] PTT KEY CONFIG setting volatile? > > Danny, > > Do a test without WSJT running. Set PTT key config to DTR - OFF, then > cycle power on the K3S. Does that setting survive the power cycle? If > so, it is not a K3S problem, look to the WSJT software for the solution. > If it does not survive the power cycle, contact K3Support. > > 73, > Don W3FPR > >> On 5/23/2016 1:08 AM, danny.higgins wrote: >> I have this on my K3S with the latest firmware. I use WSJT to key the K3S >> via the USB port and I operate in USB mode, not Data. Every time I power >> the K3S OFF I need to reset the PTT Key config to DTR – OFF. >> >> Danny, G3XVR >> >> >> From: Vic Rosenthal 4X6GP/K2VCO >> Sent: 23 May 2016 04:29 >> To: [email protected] >> Subject: Re: [Elecraft] PTT KEY CONFIG setting volatile? >> >> Which radio is it? I've never seen this on my K3. >> If you are running some kind of rig control software, try it with the >> software not running. >> >> 73, >> Vic, 4X6GP/K2VCO >> Rehovot, Israel >> http://www.qsl.net/k2vco/ >> >>> On 23 May 2016 05:51, Ken Arck wrote: >>> Sounds like a call to Elecraft tomorrow because this is repeatable! >>> >>> >>> >>> >>> At 07:42 PM 5/22/2016, Cady, Fred wrote: >>>> That doesn't sound right. I don't think mine has ever changed. >>>> Cheers, >>>> Fred KE7X >>>> >>>> ________________________________________ >>>> From: Elecraft <[email protected]> on behalf of Ken >>>> Arck <[email protected]> >>>> Sent: Sunday, May 22, 2016 4:23 PM >>>> To: [email protected] >>>> Subject: [Elecraft] PTT KEY CONFIG setting volatile? >>>> >>>> I notice the PTT KEY selection under CONFIG doesn't appear to be >>>> non-volatile as when the radio is power cycled, it always reverts to >>>> OFF - OFF. I'd like it to stay set to DTR -- RTS but it doesn't >>>> >>>> Even if I leave 13.8 to the radio, turning it OFF and back ON and >>>> that setting reverts. >>>> >>>> Ken >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[email protected] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to [email protected] >> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[email protected] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to [email protected] > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
