It may be something unique to the K3S. My older K3 didn't do it, but
the new K3S (#10641) always reverts to PTT KEY OFF-OFF on a power cycle.
must be a glitch in the FW. It IS completely repeatable as the OP
stated. Definitely call Elecraft Support on it.
Jim - W0EB
------ Original Message ------
From: "Gene Gabry" <[email protected]>
To: "'danny.higgins'" <[email protected]>;
[email protected]
Sent: 5/23/2016 7:17:03 AM
Subject: Re: [Elecraft] PTT KEY CONFIG setting volatile?
Same thing happens here with K3S SN 10057. I have no digital SW running
or rig control at the time of power down. If I set PTT to DTR and power
down for some period of time, PTT defaults back to OFF when power up.
Always done that since day one. I thought there was some update done in
latest firmware to PTT-KEY line to default those to OFF so when PC was
restarted K3S would not go into TX?
At 07:42 PM 5/22/2016, Cady, Fred wrote:
That doesn't sound right. I don't think mine has ever changed.
Cheers,
Fred KE7X
________________________________________
From: Elecraft <[email protected]> on behalf of Ken
Arck <[email protected]>
Sent: Sunday, May 22, 2016 4:23 PM
To: [email protected]
Subject: [Elecraft] PTT KEY CONFIG setting volatile?
I notice the PTT KEY selection under CONFIG doesn't appear to be
non-volatile as when the radio is power cycled, it always reverts
to
OFF - OFF. I'd like it to stay set to DTR -- RTS but it doesn't
Even if I leave 13.8 to the radio, turning it OFF and back ON and
that setting reverts.
Ken
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
