For me the hassle is I power the P3 from the K3s. Unfortunately, my K3s serial # is 10622, so I need to do the mod or have the extra wires on my desk. It would be nice if a 9V battery could be placed inside as a powering option.
73, Gary KA1J > Any K3S later than serial number 10787 (kit) or 10801 (factory assembled) > can power the K-Pod without further modification. The change was made on all > subsequent units. > > So I'd hazard the guess that yours is "ready to roll" without any further > issues. > > Yes, the K-Pod Owner's manual advises owners of older K3s or K3 rigs that > Elecraft will do the mod for them. > > Optionally, you can simply power the K-Pod from the 12 VDC power connector > on the back panel of the K3. A suitable power cable is included with the > K-Pod. > > 73, Ron AC7AC ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com