Don,

Turned off VFO OFS, but the XIT/RIT tuning from the K-POD is still erratic.

Thanks for the suggestion.

Frank
K6FW

On 7/10/16 1:23 PM, Don Wilhelm wrote:
Frank,

I don't have the K-Pod to try it, but there may some strange relationship between your K3 setting of VFO OFS. Try turning VFO OFS to OFF and see if the K-Pod RIT/XIT selection adjusts RIT properly.

If that fixes it, of course that is likely a bug, but at least you will know what is causing it. I have not heard any other reports of abnormal behavior with the K-Pod and RIT/XIT, and I have monitored the K-Pod Field Test comments.

73,
Don W3FPR

On 7/10/2016 4:00 PM, Frank Westphal wrote:
I have noticed one issue with my K-POD.

When I move the rocker switch to RIT/XIT on the K-POD and turn the RIT/XIT function on from the front panel of my K3 spinning the knob on the K-POD does not reliability change the value of the RIT/XIT. It will tune some but not consistently. Turning the RIT/XIT control from the front panel of the K3 works normally.

VFO A and VFO B respond to turning the knob on the K-POD normally.

With the rocker switch in XIT/RIT position on the K-POD and the K3 RIT/XIT function turned off then the K-POD tuning knob adjusts VFO A in coarse mode. This is normal for the way I have the K3 programmed.

I assume this must be a bug in the 5.50 beta firmware which I have installed.

As a side note installing the surface mount resister in the K3 is not for those inexperienced in micro soldering.

Frank
K6FW



______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to donw...@embarqmail.com




______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Reply via email to