Turning the K-Pod knob quickly, RIT/XIT frequency does not follow the tuning. But turning it slowly does follows the tuning.
73 de JH3SIF, Keith > 2016/07/11 6:50、DGB <ns9i2...@bayland.net> のメール: > > Not erratic here at all! > > 73 Dwight NS9I > > > On 7/10/2016 3:47 PM, Frank Westphal wrote: >> Don, >> >> Turned off VFO OFS, but the XIT/RIT tuning from the K-POD is still erratic. >> >> Thanks for the suggestion. >> >> Frank >> K6FW >> >> On 7/10/16 1:23 PM, Don Wilhelm wrote: >>> Frank, >>> >>> I don't have the K-Pod to try it, but there may some strange relationship >>> between your K3 setting of VFO OFS. Try turning VFO OFS to OFF and see if >>> the K-Pod RIT/XIT selection adjusts RIT properly. >>> >>> If that fixes it, of course that is likely a bug, but at least you will >>> know what is causing it. >>> I have not heard any other reports of abnormal behavior with the K-Pod and >>> RIT/XIT, and I have monitored the K-Pod Field Test comments. >>> >>> 73, >>> Don W3FPR >>> >>> On 7/10/2016 4:00 PM, Frank Westphal wrote: >>>> I have noticed one issue with my K-POD. >>>> >>>> When I move the rocker switch to RIT/XIT on the K-POD and turn the RIT/XIT >>>> function on from the front panel of my K3 spinning the knob on the K-POD >>>> does not reliability change the value of the RIT/XIT. It will tune some >>>> but not consistently. Turning the RIT/XIT control from the front panel of >>>> the K3 works normally. >>>> >>>> VFO A and VFO B respond to turning the knob on the K-POD normally. >>>> >>>> With the rocker switch in XIT/RIT position on the K-POD and the K3 RIT/XIT >>>> function turned off then the K-POD tuning knob adjusts VFO A in coarse >>>> mode. This is normal for the way I have the K3 programmed. >>>> >>>> I assume this must be a bug in the 5.50 beta firmware which I have >>>> installed. >>>> >>>> As a side note installing the surface mount resister in the K3 is not for >>>> those inexperienced in micro soldering. >>>> >>>> Frank >>>> K6FW >>>> >>>> >>>> >>>> ______________________________________________________________ >>>> Elecraft mailing list >>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >>>> Help: http://mailman.qth.net/mmfaq.htm >>>> Post: mailto:Elecraft@mailman.qth.net >>>> >>>> This list hosted by: http://www.qsl.net >>>> Please help support this email list: http://www.qsl.net/donate.html >>>> Message delivered to donw...@embarqmail.com >>>> >>> >>> >> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to ns9i2...@bayland.net >> >> > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to jh3...@sumaq.jp ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com