But you can via the utility, if that can apply to your needs.
Rick nhc
On 7/13/2016 2:28 PM, John E Bastin wrote:
On Jul 13, 2016, at 17:10, Jerry <[email protected]> wrote:
Greetings all,
Is it possible to be able to power on and off the KAT500 through the K3?
Short answer: No.
From the KAT500 manual:
"Connect to the station 11 to 15 VDC power supply with the white striped lead
to the positive terminal. Do not take this power from the K3’s 12 VDC output
connector, even if it has been upgraded for 1 Ampere.”
Hope this helps,
73,
John K8AJS
[email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
