Not thru, but if you control a power supply from the K3, that will do it. I bought but haven't yet installed a West Mountain Rig Runner model 4020S+ that switches power to other outlets when one "master" device is switched on.
Or use the K3 back panel RCA 12V connector to activate a relay that provides power to other station devices. The KAT500 can at times draw a bit more than the 500 ma or 1A provided by the K3 12V RCA connector. 73 de Dick, K6KR Sent from my iPhone > On Jul 13, 2016, at 14:10, Jerry <[email protected]> wrote: > > Greetings all, > > > > Is it possible to be able to power on and off the KAT500 through the K3? > > > > Best regards, > > > > Jerry, W1IE > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
