Thinking about the answers already received, allow me to ask the question in a different manner. Is it possible to control the KAT500 power on\off via programming macros in the K3 PF2 button?
Best regards, Jerry, W1IE -----Original Message----- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of John E Bastin Sent: Wednesday, July 13, 2016 5:29 PM To: Elecraft Reflector Subject: Re: [Elecraft] KAT500 question On Jul 13, 2016, at 17:10, Jerry <w...@jetbroadband.com> wrote: > > Greetings all, > > > > Is it possible to be able to power on and off the KAT500 through the K3? Short answer: No. From the KAT500 manual: "Connect to the station 11 to 15 VDC power supply with the white striped lead to the positive terminal. Do not take this power from the K3’s 12 VDC output connector, even if it has been upgraded for 1 Ampere.” Hope this helps, 73, John K8AJS jbas...@sssnet.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to w...@jetbroadband.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com