Not THAT into it... I don't own a K-pod... Was just going to review the pin out to see if a better cable design was possible...
______________________ Clay Autery, KY5G MONTAC Enterprises (318) 518-1389 On 7/15/2016 6:55 PM, Lyle Johnson wrote: > It is a 6-pin connector and the wire at pin 1 should be cut at the > radio end and to be safe cut it at both ends. > > Yes, people will use full 6-pin cables and may not observe any > problems. Regardless of such anecdotal evidencee, cut the wire to pin 1. > > And of course, turn off the radio before you plug or unplug the cable > at the radio end . No, you won't damage the radio if you don't > observe this.. Yes, you may be surprised if you don't observe this. > > You can see the schematic of the K3 to see what things are connected > to, and pencil in the mod to see what changes. > > 73, ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
