I'm a new owner and all worked fine. After an absence of a few days I came back to no power out, or , at least, very little.
Rig is the 100W version with ATU working into a dummy load. In CW mode adjusting the power level to 70W produces only a one segment power out. Running the ATU produces a 5W indication, the usual searching rumbling, but no resultant SWR. The Test mode is NOT in operation. I have restored to the last working config via K3 Utility, but suspect I must have "hit" something to limit the power. The FP and AMP temps were too high (35C) when the problem was noticed. I set them down to a more reasonable 23C without effect. Input voltage is 12.8V. Probably something trivial, but suggestions would be appreciated. Chris NQ8Z -- View this message in context: http://elecraft.365791.n2.nabble.com/Power-has-disappeared-tp7620735.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
