Hi Chris It sounds as if you have put the rig into Test mode - the middle button on the far left of the front panel.
Barry VK2BJ On 27 July 2016 at 21:34, Chris Kimball <[email protected]> wrote: > Thanks to all who responded. Alas, the problem continues. > > Let me respond to the queries to date: > > 1. The rig is a recent K3S (100W). > 2. The KPAT is on, "PA nor". > 3. The circuit breaker seems fine. No red showing on button, button feels > loose. > 4. Operation is into a dummy load, without wattmeter. > > I've tried using the TUNE button, setting the TUN PWR level to 20W. On > pushing TUNE, the panel says 0 W, even though it was set to 20W. > > In CW mode, the ALC shows reasonable ALC movement on CW sending. RF output > remains at 1 segment. > > Note: No error message has been received of any kind. All operation, other > than RF output, is fine. > > The last contact I had before leaving on the trip was on SSB just to set up > the mike. All worked fine on 20 m. Perhaps I "hit" something in playing > with SSB. > > > > > > -- > View this message in context: > http://elecraft.365791.n2.nabble.com/Power-has-disappeared-tp7620735p7620748.html > Sent from the Elecraft mailing list archive at Nabble.com. > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
